Installation & Updating

Installation & updating

System requirements

1. Eclipse 3.6 or above.
2. GF 3.3.3 or above. The path to GF must be set within the plugin preferences (see below).

Using the GF Resource Grammar Library requires that the RGL binaries are also installed on your system. If you are using the pre-compiled binaries but have separately downloaded the RGL sources to your system, you can optionally specify this path in the plugin preferences (see below).

Installing the plugin for the first time

Available Software Sites

In order for dependencies to be satisfied, you need to ensure that your Eclipse has the following update site URLs set:

• Eclipse releases (change version name to match): http://download.eclipse.org/releases/indigo
• Xtext: http://download.eclipse.org/modeling/tmf/xtext/updates/composite/releases/

You can set these from Preferences → Install/Update → Available Software Sites.

Eclipse preferences

How to find the Eclipse preferences window depends on your Eclipse version and/or OS, and may be either of:

• Window → Preferences
• Eclipse → Preferences

Installation

1. Inside Eclipse, go to Help → Install New Software.
2. Add new software site using the URL: http://www.grammaticalframework.org/eclipse/release/
3. Select the GF Eclipse Plugin, and make sure the Contact all update sites during install to find required software option is checked.
4. Click Next, accept the license agreement and install.
5. Accept the prompt warning that the software is unsigned.
6. Restart Eclipse when prompted.

Settings

1. Add the GF perspective by clicking Window → Open Perspective → Other and choosing GF.
2. Open the plugin settings by going to Preferences → Grammatical Framework (image below).
3. The plugin will try to determine the path to your GF executable automatically, but this may need to be corrected.
   The path should include the name of the GF binary itself, e.g. /home/john/.cabal/bin/gf or C:\Users\John\GF\bin\gf.exe.
4. The Additional path directive setting can be used if you want to avoid writing --# -path=... directives in your source files. By default it is set to .:alltenses:prelude, but can also be left blank. This is passed to GF using the --path flag.
5. If you are using a pre-compiled version of the Resource Grammar Library (i.e. you didn't build it from source yourself) but you have the sources available on your system, then you can enter their path in the Library source path setting. This is optional and is only used for jumping to source definitions.
   You should enter an absolute system path, up to and including the src folder, e.g. /home/john/GF/lib/src/ or C:\Users\John\GF\lib\src\.
6. You can also adjust the verbosity level of the GFEP console log in the preferences window.

Updating the plugin

1. In Eclipse, go to Help → Check for updates.
2. Any available updates will appear in the dialog. Select them and follow the usual steps.

Deprecated stuff

• Any folders .gfexternal can safely deleted as of GFEP ≥ 1.5. Using Eclipse's Clean function from the Run menu will do this for you automatically.
• If your project has a folder named (External) you can safely delete this via the Eclipse Project Explorer. It is no longer used in GFEP ≥ 1.2.3
• If your workspace contains a log file gfep.log then you can safely delete it from your system. As of version 1.2.4, GFEP uses Eclipse's standard log file at /.metadata/.log

Project settings

Although the plugin should take care of your project settings for you, in case anything gets messed up you can always correct them manually as follows:

Project nature

Your .project file should include the GF Project Nature as follows:

    <natures>
      <nature>org.grammaticalframework.eclipse.ui.natures.projectNatureID</nature>
    </natures>

Builder

Your .project file should include the GF Builder as follows:

    <buildSpec>
      <buildCommand>
          <name>org.grammaticalframework.eclipse.ui.build.GFBuilderID</name>
          <arguments>
          </arguments>
      </buildCommand>
    </buildSpec>

Specifying build files (guided build)

As of GFEP ≥ 1.5.2, you are now able to explicitly which modules in your GF project should be built by the builder. This would normally contain your "top-level" modules. This can be done right-clicking on your project in the Project Explorer and choosing Properties → GF Build Settings. From here you simply tick which modules in your project the GF builder should compile:

When doing this, GFEP will never attempt to compile any other files in the project. Whenever you add a new top-level module or change your module hierarchy, be sure to check these build settings again.

Getting started

Getting started

Some steps you can follow to get a feel of of the plugin's features.

Video tutorial

A quick run through of the major features available in the GF Eclipse Plugin. If the video doesn't appear above, you can view it at https://vimeo.com/38768382

The Eclipse workspace and project concepts

When you run Eclipse, it asks you to create or specify a workspace on your system, which is essentially the top directory that Eclipse will "see". Any code you wish to work on inside Eclipse must reside in this workspace. A workspace contains one or more projects, which may or may not be related to each other. Generally each folder under the top-level workspace directory is considered an individual project, i.e.:

workspace/
    Project1/
        file1-1.gf
        file1-2.gf
    Project2/
        subdir2-1/
            file2-1-1.gf
            file2-1-2.gf
        file2-1.gf
        file2-2.gf

If you open an existing folder as your workspace in Eclipse, then your folders in that workspace do not automatically become Eclipse projects. To do this, you must follow the "Create new GF Project" wizard below, and give your project the exact name of the existing folder (e.g. Project1 or Project2 in the example above.)

GF Nature

The GF Nature is what makes a regular Eclipse project a GF project. If you create a new GF Project from scratch then you don't need to worry too much about them. If you already have some project set up in your Eclipse workspace, then you will need to associate the builder with your project in order for all the GF goodness to work. This will internally add the GF Builder to your project also.

As of 1.4.2, this can be done very easily by right-clicking on your project in the explorer and clicking Add/Remove GF Nature. If your project has the GF icon overlayed on it, then the GF nature and builder are correctly associated with it.

See the project settings section above if you want to mess with your .project file.

Metadata folders

GFEP will create the following metadata directories within your project:

• A .gfbuild directory in every folder containing GF source code, containing .gf-tags files created using the GF --tags compiler flag.

These can be removed manually at any time, as they will always be regenerated as necessary. You will probably want to ignore these directories in your version control system.

Create a new GF Project

If you have a folder in your workspace which you want to convert into a GF Project, then you can select it from the drop-down. This folder will then appear as an Eclipse project in your workspace.

New module wizard

Use the GF Module wizard from File → New → Other → GF Module:

You can find some small examples here. Download the files and manually add them to your Eclipse workspace to experiment with some of the plugin features.

Clone module wizard

If you want to clone an existing module into a new language, you can now do so via the Clone GF Module wizard. This is also available as a context menu option in the Project Explorer, via <Right click> → Grammatical Framework → Compile for new language:

This will create and open a new module with the relevant replacements made. Note how in this case string constants are replaced by the empty string "". This wizard currently only works on concrete and instance modules.

Workbench editor layout

Use Eclipse' own features to drag and drop your editor tabs to suit your needs.

Outline view

The Outline view in the bottom-left offers a quite overview of your module structure. Clicking any of the terms will make your cursor jump to that point in the file.

Cross-referencing errors and warnings

Notice how changing a cat definition for example will produce warnings and/or errors in other the modules.

Validation

The in-editor validation sometimes needs to be triggered/updated by a keystroke. If you can still see errors which you believe should be correct, try adding a space character to ensure the validation is re-triggered.

Sometimes you may get an entire file marked with errors, even though in fact there is only a single error which is causing the internal builder to fail. In such cases referring to the Problems view should help you locate the cause. This issue is particularly relevant when changes made to one module may induce errors in its descendants (e.g. renaming a parameter in a resource module). This behaviour will hopefully be improved in future versions.

Builder

For validation to work correctly, the project's Build Automatically option should be turned on. Each time you save a file (or some other change occurs in your project), the builder should get triggered which re-compiles any GF files which have changed. If the builder does not seem to get triggered, try to run a clean via Project → Clean...

Code formatting

Use the built-in code formatter to tidy your code automatically. Right-click in the editor and choose Format or use the keyboard shortcut Ctrl+Shift+F.

Syntax highlighting

You can change your syntax colouring styles as you wish from Preferences → Grammatical Framework → Syntax Coloring

Launch configurations

Set up a launch configuration from Run → Run Configurations... → Grammatical Framework. You will see the dialog below with some fields automatically filled in for you.

Run the launch config and you will see the output from the GF compiler in the console view within Eclipse.

Run As... launch shortcut

Using the Run → Run As → Compile with GF shortcut will take the current selection or active editor and do one of two things:

1. If a launch configuration already exists which the current file in its Source filenames field, then that config will be launch directly.
2. Otherwise, a new a launch configuration window is displayed where you will need to review and confirm the default settings before continuing.

Consoles

The plugin provides its own console view named GFEP Log, which shows log messages based on the Log Level preference (Preferences → Grammatical Framework).

Additionally, every time a grammar is Run a new console is opened to display the output. This console may also serve as the interactive GF Shell, depending on the Interactive Mode checkbox in your Run Configuration.

Eclipse does not make it obvious when multiple console windows open; click on the Display Selected Console button to switch between open consoles:

If the process associated with a console window has terminated, it will be indicated in the upper-left corner as below. Such console windows can then be closed using the grey cross button:

The Eclipse console implementation does not support command history (up arrow) or auto-completion (tab).

External Libraries view

This view is automatically populated with a list of all the external modules referenced by the current file. Double-clicking on any item provides a quick way of opening GF files which are imported into your grammar from outside your Eclipse project, for example the GF Resource Grammar Library.

This view also provides a text box for searching within the current module's scope, as shown in the image below. Clicking the small arrow on the right-hand side of the view provides options for case sensitive and/or regular-expression based search.

Test Manager view

This feature works together with the launch configurations to make the process of running regression tests on your grammars quick and easy. As described in the GF Book (Section 10.5), the general development-test cycle (independent of GFEP) is as follows:

1. Create a file test.trees which contains a bunch of abstract syntax trees, which you want to test
2. Compile your grammar and linearise the trees one by one, using some command like rf -lines -tree -file=test.trees | l -table | wf -file=test.trees.out
3. Manually correct the output in test.trees.out and save it as your gold standard file test.trees.gold.
4. Each time you update your grammar, repeat step 2, then compare your new output against the gold standard using diff or some other comparison tool.

The Test Manager view follows this same pattern but provides a convenient graphical interface for running your test cases and also for looking at the output, just using a few clicks:

Note that GFEP assumes the following convention:

*.trees or *.sentences

Test input files: trees file (for testing linearisation) and sentences file (for testing parsing)

*.trees.out or *.sentences.out

Corresponding output files (generated each time a test is run)

*.trees.gold or *.sentences.gold

Corresponding gold standard files (manually corrected from an output file)

Logs

The GFEP writes to the Eclipse platform log. This can be accessed in two ways:

1. By opening the Error Log view in Eclipse
2. Accessing the file directly at <workspace>/.metadata/.log

You can set the log verbosity from Preferences → Grammatical Framework.

Common issues and fixes

No identifiers are resolved and my log contains messages saying "File Syntax.gf does not exist."

In general, this means that something is wrong with your library path setting.

GFEP attempts to compile all of your files individually with GF, which is not the usual way in which you would compile your grammar. As a result, when looking for the RGL files, GF needs a little help via the path argument.

The normal way to do this is to specify the Library path setting from Preferences → Grammatical Framework, setting it to something like .:alltenses:prelude (this is the default setting). Note that these paths are relative to the true RGL directory, which GF should already be aware of. The value of this setting is passed to GF from GFEP using the --path flag.

The Library path setting is the same for all your GF projects. If you want finer-grain control over the path compiler option then you should use compiler pragmas in your source files, e.g.:

--# -path=.:alltenses:prelude

The advantage of this method is that the information is bound to the file, so you can freely compile your modules outside of GFEP without having to specify the path as a command line option to GF. The disadvantage is that you need to specify such a pragma in every single file (at least if you want to continue to use the GFEP).

Other strange behaviour

When things seem strange, the very first step is always to clean the project via Project → Clean.... I only support the latest version of the plugin, so make sure you are up to date too.

If problems persist, please contact me or better yet file an issue on the GitHub issue tracker (see below).

For developers

Project setup

In order to build/run the GFEP from source, you need to have the Xtext libraries available in your Eclipse workspace. You have two choices:

1. Download the Xtext libraries from http://www.eclipse.org/Xtext/download/ and add them to your existing Eclipse instance
2. Download a release of Eclipse packaged together with Xtext from http://xtext.itemis.com/xtext/language=en/36553/downloads

In both cases make sure you get the correct version of Xtext (see below). Once you have Xtext set up, you can clone the repository locally with git clone git://github.com/GrammaticalFramework/gf-eclipse-plugin.git and then add the projects under the workspace directory to your Eclipse workspace.

Xtext version

GFEP currently uses Xtext 2.1.0.

Running from source

Once you have set up your projects (see above), you can run/debug the GFEP by following the steps here. Note that this means you will be running two instances of Eclipse simultaneously; the first debugging the second.

Building plugin package

To package the GFEP sources as .jar files and install/update the GFEP in a separate Eclipse installation, do the following:

1. Right-click on the project org.grammaticalframework.feature and choose Export...
2. Select Plug-in Development → Deployable features
3. Use the following options:
   • Available features: org.grammaticalframework.feature (x.y.z.qualifier)
   • Destination
     • Directory: <local directory>
   • Options
     • Package as individual JAR archives
       • Generate metadata repository
       • Categorize repository: <workspace>/org.grammaticalframework.feature/category.xml
     • Allow for binary cycles in target platform
4. Click Finish and wait for the plugin to build. You may get some errors, in which case look through the generated log.zip and fix them, then repeat the process.

Other notes

Some have mentioned than when opening the GFEP sources, under Linux, they needed to install the following:

sudo apt-get install appmenu-gtk
sudo apt-get install gtk2-engines-pixbuf

Evaluation & feedback

Evaluation & feedback

Please try to use the plugin for developing your own GF projects and report any issues you come up against. Feedback (both negative and positive) on the following would be appreciated:

1. Issues encountered with installation
2. Incorrect support of GF syntactic constructs, module hierarchy system
3. Performance issues (speed, resources footprint)
4. General intuitiveness of the UI
5. Feature wish-list
6. Compatibilities / conflicts with other Eclipse plugins

For all bug reports and feature requests, please use the GitHub Issue Tracker.

Appendix

Module types

Description of the GF module types and their icons within the GF Eclipse Plugin.

Icon	Description	Notes
	Abstract module	abstract Foods = {...}
	Concrete module	concrete FoodsEng of Foods = {...}
	Resource module	resource ResFoods = {...}
	Interface	interface LexFoods = {...}
	Instance	instance LexFoodsEng of LexFoods = {...}
	Functor	incomplete concrete FoodsI of Foods = {...}
	Functor instantiation	concrete FoodsEng of Foods = FoodsI with (...) {...}

Build command

This is the GF command run by the builder:

gf --v=0 --tags --output-dir=.gfbuild [--path=PATH] FILE